CCI Breiding GmbH

CCI Breiding GmbH Redesigning standards - we create your grate! Breiding wear parts target an enhanced service life and contribute to an improved combustion.

Scale benefits are our comparative advantages. Disclaimer

PLEASE READ CAREFULLY THE FOLLOWING TERMS OF USE, WHICH APPLY TO ALL VISITORS TO THIS SITE. BY DECIDING TO VISIT THIS SITE, YOU IMPLICITLY AGREE TO ABIDE BY ITS TERMS.

1. Disclaimer of liability
No assured properties can be inferred from any of the information provided on our web pages. The information is provided as a service, and cannot

replace a personal consultation. Despite having carefully procured the information and made it available, we do not accept any liability or offer any warranty for the accuracy, completeness and currentness of the content provided and displayed for download as part of the information service. Liability claims against CCI Breiding GmbH relating to material damage or loss of intellectual property occasioned by the use or failure to use the information provided, or to the use of incorrect or incomplete information, are excluded in all cases, unless CCI Breiding GmbH can be demonstrated to have been deliberately or grossly negligent. Furthermore, CCI Breiding GmbH cannot be held liable for any kind of damage or loss resulting from access to or use of this website. In the event that parts or individual formulations of this text do not correspond, no longer correspond or no longer completely correspond to the applicable legal basis, the other parts of the document shall be unaffected in terms of their content and their validity. CCI Breiding GmbH expressly reserves the right to change, supplement or delete parts of the pages or the entire website without special notification, or to cease the publication temporarily or permanently. Access to and use of this website is exclusively subject to the substantive law of the Federal Republic of Germany.

2. Copyright
The created content and intellectual property on these pages is the property of CCI Breiding GmbH and is subject to German copyright law. Contributions by third parties are indicated as such. Reproduction, editing, dissemination and any kind of utilisation beyond the limits of copyright law are prohibited. Downloads and copies of this page are only allowed to be used for private, non-commercial purposes. The product names, logos and company logos used on the website are legally copy-protected. We are always concerned to comply with the copyrights of other parties, or to use intellectual property that we have created ourselves or which is not subject to licence.

3. Technical information
It is to be recalled that the confidentiality of correspondence is not guaranteed on the network and that it is up to each Internet user in particular to take all appropriate steps to protect his own data and/or software against contamination by any viruses circulating on the Internet.

23/03/2021

Die WVT Breiding GmbH stiftet acht iCovir UVC Luftreiniger zur Beseitigung infektiöser Aerosole in den Klassenräumen der Villigster Grundschule. Es geht dabei nicht nur um die soziale Verantwortung, die wir als Schwerter Unternehmer tragen. Es gibt viele Argumente, die für die Stiftung der Gerät...

11/09/2020
17/06/2020

BREIDING FAQ:

Why should I order parts from Breiding?
Incineration plants are our core industry sector. We focus on spare parts in the combustion chamber for more than 35 years. Every shipment is inspected and documented. We offer competitive prices, low pattern costs and short delivery times.

Who are your clients?
We currently supply 22 OEM’s and hundreds of plants worldwide.

I know my (OEM) parts fit, why should I change?
The larger the OEM’s get, the bigger the overhead costs per unit commonly get. We have one of the best quality control processes in the industry. We offer standardized parts for reasonable prices.

Can you redesign the parts to make them fit better or survive longer?
Yes, we can! OEM’s often stick to standardized products in order to keep process diversity and stock costs low – but standards tend to be inflexible. We customize your parts to your application and produce by order. Using Breiding, you get the benefit of our field experience and sharing of upgrades and improvements.

Will customized parts be more expensive than standard parts?
No, our kilo prices for standard or customized parts are the same. There is no surcharge on engineering.

We create your grate...
17/06/2020

We create your grate...

05/02/2020

Die WVT Breiding GmbH hat am 04.02.2020 das Inhouse Seminar „Zeitmanagement“ von Markus Dörr erleben dürfen. Die Themen Zufriedenheit und Zeit standen für unsere Mitarbeiter/Innen im Fokus.   Frei nach Henry Ford: „Wer immer tut, was er schon kann, bleibt immer das, was er schon ist.“  ...

06/06/2019

LIGNA 2019 – thank you for your visit.

The LIGNA 2019 in Hannover ended May 31st. We want to say thank you for your visit at the Breiding booth. During the exhibition week we had a number of interesting conversations at our booth. We will get in touch with you as soon as possible. If you have urgent matters or if you want to send us drawings, pictures or samples, you can reach us any time in advance via e-mail.

Roststabfibel 3 jetzt auch in Englisch!Endlich – nach fast einem Jahr Übersetzungsarbeit – haben wir die Roststabfibel 3...
15/05/2019

Roststabfibel 3 jetzt auch in Englisch!

Endlich – nach fast einem Jahr Übersetzungsarbeit – haben wir die Roststabfibel 3 auch in Englisch erhältlich!

Endlich – nach fast einem Jahr Übersetzungsarbeit – haben wir die Roststabfibel 3 auch in Englisch erhältlich!

WVT Breiding exhibits at   2019 in Hannover!Hall 26 – G75CCI Breiding is supplying foundry products independently of OEM...
10/05/2019

WVT Breiding exhibits at 2019 in Hannover!

Hall 26 – G75
CCI Breiding is supplying foundry products independently of OEM’s all over the world. We deliver grate bars, nozzles and tube protection shields both to OEM’s and all kinds of incineration plants. With a flat company structure, we generate scale benefits and pass the purchasing advantages on to our customers.

Our portfolio comprises spare parts in cast iron/stainless (heat resistant) steel for all systems – standard and optimized.

Your OEM’s standard works well?
• Benefit from budget-saving purchase prices!

Your grate bars or tube protection shields should be more durable?
• We design and supply wear parts – adapted to your combustion. Benefit from optimized wear parts! Save additional budget by enhanced wear part life cycles, increased plant efficiencies and reductions in maintenance effort!

If you want to learn more about our products and the opportunities of working with Breiding, we are pleased to welcome you at the Ligna in Hannover from May 27th to May 31st. Meet us at our booth in hall 26, stand G75 – we present an extract of our optimized wear parts portfolio. If you need more information please visit our homepage, give us a call or write us an email. Company Breiding is looking forward to get in touch with you.

CCI Breiding is supplying foundry products independently of OEM’s all over the world. We deliver grate bars, nozzles and tube protection shields both to OEM’s and all kinds of incineration plants. With a flat company structure, we generate scale benefits and pass the purchasing advantages on to ...

Jetzt anmelden: Zum 18. Mal richtet die WVT Breiding GmbH den Erfahrungsaustausch für den Betrieb und die Instandhaltung...
17/08/2018

Jetzt anmelden: Zum 18. Mal richtet die WVT Breiding GmbH den Erfahrungsaustausch für den Betrieb und die Instandhaltung von Verbrennungsanlagen, Heiz- und Kraftwerken aus. Die Schwerpunkte dieses Erfahrungsaustausches liegen auf Produktinnovationen und praktischen Erfahrungsgewinnen im Betrieb von Müllverbrennungsanlagen, Biomassekraftwerken und Wärme- bzw. Dampferzeugern.

Argus Biomass Conference 2018 in London
17/04/2018

Argus Biomass Conference 2018 in London

Ein herzliches „Willkommen“ unserem neuen Mitarbeiter, lieber Walter. Wir freuen uns auf London! Treffen Sie uns an unse...
14/04/2018

Ein herzliches „Willkommen“ unserem neuen Mitarbeiter, lieber Walter. Wir freuen uns auf London! Treffen Sie uns an unserem Messestand während der Argus Biomass Conference.

Adresse

Binnerheide 8
Schwerte
58239

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von CCI Breiding GmbH erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.

Teilen